Bulk Material Sidewall Belt Conveyor , Automatic Conveyor Belt Increased Friction
General
The machine is short for "sidewall belt conveyor" or "high inclination angle belt conveyor", with the advantages of simple structure, reliable operation, and convenient maintenance of general conveyor, and the features of high inclination angle conveying, compact structure, less land occupation, is the ideal equipment for high inclination angle conveying (even for vertical conveying).
Working Principles
The horizontal loading section leads a deflection wheel bends the belt into the feeding of the bulk material takes place on a mostly horizontal feed path, where the side wall belt is supported by loading impact idlers. The feeding of the conveyed material can be achieved by direct feeding from a hopper, over a chute, a feeding belt or a feeding pulley. The selection of the optimum feeding station depends on the properties of the bulk material and the belt speed of the vertical conveyor. The upward and downward strands are encased from the bottom to the top. Substructures or support rollers are not necessary in this section.
The vertical section leads over a deflection curve into the horizontal discharge section. The deflection curve is made up of a number of high specification pulleys. These pulleys experience the vectored load of deflecting the belt tension from vertical to horizontal.
At the drive pulley, the bulk material is discharged and the belt is returned to the back going strand. Depending on the bulk material properties, the drive pulley is followed by a beater wheel for belt cleaning in the return side. The beater is self-driven. Material that fails from the belt goes into the main delivery chute. Lateral deflection wheels turn the belt from the horizontal back to the vertical.
Application
Corrugated sidewall belt conveyor is one of the most commonly used mining equipment, which is widely used in mineral processing, construction materials, silicate and chemical industries. In the production of small scale, medium scale or large scale mineral processing Plants, it is generally used as the transportation machine for metal ores of gold, silver, copper, lead, zinc, nickel, manganese, iron, molybdenum , chromium, tin and others, as well as stone, rock, granite, limestone, quartz, graphite, feldspar, coal, etc.
Technical parameters for reference
Remarks: the below capacity is based on coal and speed 1m/s to caculated for reference.
| Bandwidth | 500mm |
| Cleats hight | 80mm | 120mm | 160mm |
| Pitch of cleats | 126mm | 252mm | 126mm | 252mm | 378mm | 252mm | 378mm |
| Slop | 30 degree | 39 t/h | 21 t/h | - | 52 t/h | 34 t/h | 65 t/h | 45 t/h |
| 40 degree | 31 t/h | 16 t/h | - | 40 t/h | 26 t/h | 52 t/h | 34 t/h |
| 50 degree | 25 t/h | 13 t/h | 60 t/h | 32 t/h | - | 42 t/h | 27 t/h |
| 60 degree | 20 t/h | 11 t/h | 50 t/h | 26 t/h | - | 34 t/h | 23 t/h |
| 70 degree | 17 t/h | - | 41 t/h | 21 t/h | - | 28 t/h | 18 t/h |
| 90 degree | 10 t/h | - | 25 t/h | - | - | 17 t/h | - |
Selection Conditions
- Material to be processed: _____
- Max. granule size of the feeding material: _____mm
- Handling capacity (Ps. It means the total material capacity feeding from the inlet): _____t/h
- Percentage of Max. granule in material:_________%
- Upstream equipment (Ps. It means what kind of Equipment is used to feed the material):____
- Bulk Density: _____t/m3
- Material temperature: _____℃;
- Downstream equipment (Ps. It means what kind of equipment is used to discharge the material): _____
- Water content:____%
- Material is corrosive or not: ____ (Ps. Yes or No)
- Working power supply: _____V ______HZ
- Material is sticky or not: ____ (Ps. Yes or No)
- Working environment is indoor or outdoor: _______
- Working environment temperature: ______ ℃
- Please refer to the following picture and provide the relevant parameters:L1____m, L2___m, H___m, α____°
Product Tags:
|
|
Bulk Material Sidewall Belt Conveyor , Automatic Conveyor Belt Increased Friction Images
|
